Adjusting the projected image, Adjusting the projector height – Compaq MP3800 User Manual
Page 19
Advertising
Using the Projector
Compaq iPAQ Microportable Projector MP3800 User’s Guide
2–9
Adjusting the Projected Image
There are three ways to adjust the projected image:
■
Adjusting the projector height
■
Adjusting the image size
■
Adjusting the projector focus
Adjusting the Projector Height
The projector has a built-in elevator foot that can raise the
projector approximately 1 inch (2.54 cm).
Ä
CAUTION:
If the projector is mounted to a tripod, do not use the
elevator foot.
To adjust the height:
1. Raise the projector to the desired display angle, then press the
elevator button 1 to release the elevator foot 2.
281124-001.book Page 9 Tuesday, April 30, 2002 10:00 AM
Advertising