Compaq MP3800 User Manual
Page 53
Care and Maintenance
Compaq iPAQ Microportable Projector MP3800 User’s Guide
7–5
After the lamp module has been replaced, reset the lamp hours in
the on-screen display menu to prevent the “Lamp May Fail Soon.
Replacement Suggested” message from appearing again. To reset
the lamp hours:
1. Be sure the projector is turned off.
2. Make sure all connections except the power cable are
disconnected.
3. Press and hold the
Menu
button on top of the projector while
turning the projector on.
4. Connect the VGA cable to the projector. “Service” will now
be displayed as an option in the Main menu.
5. Select Service and press the
Menu
button on the top of the
projector.
6. Select Reset Lamp Hours from the Service menu and press
the
Menu
button.
7. Select Yes from the Confirm Reset menu and press the
Menu
button.
8. Select Save and Return.
281124-001.book Page 5 Tuesday, April 30, 2002 10:00 AM