Compaq MP3800 - Manual (Page 56)

Troubleshooting
Compaq iPAQ Microportable Projector MP3800 User’s Guide 8–3
Notebook computer or iPAQ
Pocket PC screen is not displaying
the presentation. Notebook computer:
Most notebook computers have a monitor
loop-through or simultaneous viewing
function. Press the
Fn + F4 function keys
on the notebook computer to switch the
image from the notebook screen to the
projection screen or to toggle through the
following three options:
1. LCD: Output displays only on the
notebook screen.
2. CRT: Output displays only on the
projection screen.
3. CRT/LCD: Output displays on the
notebook screen and the projection
screen.
Activate CRT/LCD “ON” at the same
time. To identify any alternate function
keys to be used, refer to your notebook
computer’s user manual.
Mac PowerBooks:
1. To control video mirroring, click
Control Panel > Display, then set
Video Mirroring to ON for both
internal and external viewing.
2. Set Video Mirroring OFF for image
on external monitor only or internal
only, depending on monitor selection
in Monitors.
Troubleshooting (Continued)
Problem Solutions
281124-001.book Page 3 Tuesday, April 30, 2002 10:00 AM