Compaq MP3800 - Manual (Page 16)

2–6 Compaq iPAQ Microportable Projector MP3800 User’s Guide
Using the Projector
Powering On the Projector
1. Make sure the power cord and signal cable are securely
connected.
2. Make sure the projector is perpendicular to the projection
screen.
✎
If the projector cannot be placed perpendicular to the screen, use
the Image Control adjustment in the OSD menu to adjust
horizontal keystoning. Refer to Chapter 3, “Using the On-Screen
Display Menu,” for more information
3. Remove the lens cap 1 from the projector by pressing in
on the tabs on either side of the lens cap and pulling it
straight out.
4. Press the Power/Standby button 2 on the top of the projector.
When the projector has warmed up, the Compaq startup
screen displays and the LED on the
Power/Standby button
turns green.
281124-001.book Page 6 Tuesday, April 30, 2002 10:00 AM