Canon GM-1000 - Manual (Page 123)

CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
123
Parameter ID 51
Parameter
Name
VR head2 AB offset
Data A/B-phase offset of encoder VR adjustment head 2 (Unit: none)
Return Value 0: Parameter setting successful
1: Parameter setting unsuccessful
Explanation This parameter is used to adjust the offset of the encoder signal.
Note: This is usually set appropriately at shipping.
Related
Command
/Parameter
Parameter ID 52
Parameter
Name
VR head2 A gain
Data A-phase amplitude of encoder VR adjustment head 2 (Unit: none)
Return Value 0: Parameter setting successful
1: Parameter setting unsuccessful
Explanation This parameter is used to adjust the A-phase amplitude of the encoder signal.
Note: This is usually set appropriately at shipping.
Related
Command
/Parameter
Parameter ID 53
Parameter
Name
VR head2 B gain
Data B-phase amplitude of encoder VR adjustment head 2 (Unit: none)
Return Value 0: Parameter setting successful
1: Parameter setting unsuccessful
Explanation This parameter is used to adjust the B-phase amplitude of the encoder signal.
Note: This is usually set appropriately at shipping.
Related
Command
/Parameter