Canon GM-1000 - Manual (Page 43)

CANON Digital Galvano Scanner System GM-1000 Series
Users Manual 1.20
43
Connection
status
3.4. Software Start Up
・ Connect the controller and the PC with the optional RS-232C cable.
・ Select Windows “START” - “Programs” - “Canon Scanner” - “Control Software”.
・ Setting the COM port
Select the connected RS-232C port and press the OK button.
・ The control screen is displayed.
While communication with the controller has not started yet, the screen displays “DISCONNECT”
in gray at the upper left as the connection status.
Note: The value of each item on the above screen differs depending on the controller status.