Dell Inspiron 23 (5348, Early 2014) - Manual (Page 36)

Replacing the System-Board
Shield
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align and place the system-board shield on the display-panel base.
2 Slide the tabs on the system-board shield into the slots on the display-
panel base until it snaps into place.
Post-requisites
1 Replace the back cover .
2 Replace the stand assembly .
36