Replacing the power-supply diagnostic board, Procedure, Post-requisites – Dell Inspiron 23 (5348, Early 2014) User Manual
Page 51
Advertising
Replacing the Power-Supply
Diagnostic Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Connect the power-supply diagnostic board cable to the connector on
the power-supply diagnostic board.
2 Align the screw hole on the power-supply diagnostic board with the
screw hole on the I/O bracket.
3 Replace the screw that secures the power-supply diagnostic board to the
I/O bracket.
Post-requisites
1
Replace the
2 Replace the
.
3 Replace the
.
4 Replace the
.
51
Advertising