Replacing the antenna, Procedure, Post-requisites – Dell Inspiron 23 (5348, Early 2014) User Manual

Page 99

Advertising
background image

Replacing the Antenna

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in

Before Working Inside Your Computer

. After working inside your

computer, follow the instructions in

After Working Inside Your

Computer

. For more safety best practices, see the Regulatory

Compliance home page at dell.com/regulatory_compliance.

Procedure

1

Align the screw holes on the antenna modules with the screw holes on

the display bezel.

2 Replace the screws that secure the antenna modules to the display bezel.
3 Route the antenna cables through the routing guides on the display-

panel base.

4 Adhere the tape to secure the antenna modules to the display bezel.

Post-requisites

1

Replace the

system board

.

2 Replace the

coin-cell battery

.

3 Replace the

wireless card

.

4 Replace the

processor

.

5 Replace the

processor fan

.

6 Replace the

processor heat-sink

.

7

Replace the

power-supply unit

.

8 Replace the

power-supply fan

.

9 Replace the

optical drive

.

10 Replace the

I/O bracket

.

11 Replace the

power-supply diagnostic board

.

12 Replace the

converter board

.

13 Replace the

control buttons board

.

14 Replace the

VESA-mount bracket

.

15 Replace the

hard drive

.

16 Replace the

system-board shield

.

17 Replace the

memory module(s)

.

99

Advertising