Replacing the control-buttons board, Procedure, Post-requisites – Dell Inspiron 23 (5348, Early 2014) User Manual
Page 45
Advertising
Replacing the Control-Buttons
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Connect the control-buttons board cable to the connector on the
control-buttons board.
2 Replace the control-buttons board into the slot on the display bezel.
3 Align the screw hole on the ground cable with the screw hole on the
display-panel base.
4 Replace the screw that secures the ground cable to the display-panel
base.
Post-requisites
1
Replace the
.
2 Replace the
.
45
Advertising