Dell Inspiron 23 (5348, Early 2014) - Manual (Page 48)

Replacing the Converter Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the converter board with the screw holes on the
display-panel base.
2 Replace the screws that secure the converter board to the display-panel
base.
3 Connect the converter-board cable and display-backlight cable to the
connectors on the convertor board.
Post-requisites
1 Replace the back cover .
2 Replace the stand assembly .
48