Dell 3330dn Mono Laser Printer - Manual (Page 120)

50 PPDS font error
Try one or more of the following:
• Press the down arrow button until Continue appears, and then press to clear the message and continue
printing.
• The printer cannot find a requested font. From the PPDS menu, select Best Fit, and then select On. The printer
will find a similar font and reformat the affected text.
• Cancel the current print job.
51 Defective flash detected
Try one or more of the following:
• Press the down arrow button until Continue appears, and then press to clear the message and continue
printing.
• Cancel the current print job.
52 Not enough free space in flash memory for resources
Try one or more of the following:
• Press the down arrow button until Continue appears, and then press to stop the defragment operation
and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
• Delete fonts, macros, and other data stored in flash memory.
• Upgrade to a larger capacity flash memory card.
53 Unformatted flash detected
Try one or more of the following:
• Press the down arrow button until Continue appears, and then press to stop the defragment operation
and continue printing.
• Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Standard network software error
Try one or more of the following:
• Press the down arrow button until Continue appears, and then press to continue printing.
• Turn the printer off and then back on to reset the printer.
• Upgrade (flash) the network firmware in the printer or print server.
56 Standard parallel port disabled
Try one or more of the following:
• The printer discards any data received through the parallel port. Press to clear the message and continue
printing.
• Make sure the Parallel Buffer menu item is not set to Disabled.
Understanding printer messages
120