Dell 3330dn Mono Laser Printer - Manual (Page 25)

Installing hardware options
Installing an optional drawer
The printer supports an optional drawer. Only one drawer may be installed on the printer at one time.
CAUTION—SHOCK HAZARD: If you are installing an optional drawer after setting up the printer, then turn the
printer off and unplug the power cord from the wall outlet before continuing
1 Unpack the drawer, and then remove any packing material from the outside of the drawer.
2 Remove the tray from the support unit.
3 Remove any packing material and tape from inside the tray.
4 Insert the tray into the support unit.
5 Place the drawer in the location chosen for the printer.
Additional printer setup
25