Dell 3330dn Mono Laser Printer - Manual (Page 56)

Source or process Print side Paper orientation
Multipurpose feeder
Simplex (one-sided)
printing Preprinted letterhead
design is placed faceup. The top edge of the sheet with the logo should enter the
multipurpose feeder first.
Multipurpose feeder
(duplex printing) Preprinted letterhead
design is placed
facedown. The top edge of the sheet with the logo should enter the
multipurpose feeder last.
Note: Check with the manufacturer or vendor to determine whether the chosen preprinted letterhead is acceptable for
laser printers.
Tips on using transparencies
Print samples on the transparencies being considered for use before buying large quantities.
When printing on transparencies:
• Feed transparencies from the standard 250-sheet tray or the multipurpose feeder.
• Use transparencies designed specifically for laser printers. Check with the manufacturer or vendor to ensure
transparencies are able to withstand temperatures up to 175°C (350°F) without melting, discoloring, offsetting,
or releasing hazardous emissions.
Note: Transparencies can be printed at a temperature up to 180°C (356°F) if Transparency Weight is set to Heavy
and Transparency Texture is set to Rough. Select these settings using the Embedded Web Server, or from the
printer control panel Paper menu.
• To prevent print quality problems, avoid getting fingerprints on the transparencies.
• Before loading transparencies, fan the stack to prevent sheets from sticking together.
Printing
56