Dell Latitude D630 XFR (Early 2008) - Manual (Page 104)

Dell TM XFR D630 Fully Rugged Notebook Service Manual
Page 104 of 106 Revision A01
3. Attach the 2 antenna cables. Refer to the antenna cable wiring diagram to ensure the antenna
cables are properly attached.
4. Install the system board (see
295H
Installing the System Board).
25 Bottom Chassis
25.1 Removing the Bottom Chassis
CAUTION: Before working inside your computer, follow the safety instructions in the
XFR D630 Product Information Guide and in the XFR D630 User’s Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
periodically touching an unpainted metal surface (such as a connector on the back of the
computer).
1. Follow the instructions in
296H
Before You Begin.
2. Remove the system board (see
297H
Removing the System Board).
NOTE: When removing the system board you do not need to remove the system memory or the
processor.
3. Remove the fan (see
298H
Removing the Fan).
4. Remove the RF passthru board (see
299H
Removing the RF Passthru Board).
5. Remove the modem cable (see
300H
Removing the Modem Cable).