Dell Latitude D630 XFR (Early 2008) - Manual (Page 47)

Dell TM XFR D630 Fully Rugged Notebook Service Manual
Page 47 of 106 Revision A01
5. Place connectors from the spliced cable and the backlight power cable in the recessed area of
the thermal solution. Stack them and use a 2.5” piece of Kapton tape to hold them in place
below the level of the palmrest.
6. Assemble the keyboard stiffener bar into the slot above the power and audio buttons. Do this
before assembling the keyboard to the palmrest.
Connectors should not
stack above this level.