Nstalling the, Odem, Processor thermal-cooling assembly – Dell Latitude D630 XFR (Early 2008) User Manual

Page 85: 17 processor thermal-cooling assembly, 2 installing the modem

Advertising
background image

Dell

TM

XFR D630 Fully Rugged Notebook Service Manual

Page 85 of 106

Revision A01

1 modem pull-tab

2 M2 x 3-mm screw

3 modem cable

4 system board connector

NOTICE: Do not disconnect the modem cable from the system board.

9. Disconnect the modem cable from the modem.

16.2

Installing the Modem

NOTE:

When replacing the modem, it is easier to connect the modem cable to the modem before

you press the modem into the system board connector.

1. Connect the modem cable to the modem.

2. Connect the modem to the connector on the system board.

3. Install the M2 x 3mm screw that attaches the modem to the system board.

4. Replace the palm rest (see

193H

Installing the Palm Rest).

5. Replace the display assembly (see

194H

Installing the Display Assembly).

6. Replace the keyboard (see

195H

Keyboards).

7. Replace the hinge cover (see

196H

Installing the Hinge Cover).


17 Processor Thermal-Cooling Assembly

Advertising