Dell Precision M40 - Manual (Page 55)

“This equipment shall not be set up to make automatic calls to the Telecom ‘111’ Emergence Service.”
“If a charge for local calls is unacceptable, the ‘Dial’ button should NOT be used for local calls. Only the 7-digits of the local number should be
dialed from your telephone. DO NOT dial the area code digit or the
‘0’ prefix.”
“This equipment may not provide for the effective hand-over of a call to another device connected to the same line.”
Important Notice
“Under power failure conditions, this telephone may not operate. Please ensure that a separate telephone, not dependent on local power, is
available for emergency use.
”
“Some parameters required for compliance with Telecom’s Telepermit requirements are dependent on the equipment (PC) associated with this
device. The associated equipment shall be set to operate within the following limits for compliance with Telecom
’s Specification:
1. There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation, and the
equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt.
2. Where automatic calls are made to different numbers, the equipment shall go on-line for a period of not less than 5 seconds between the end
of one attempt and the beginning of the next attempt.
3. The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing. ”
“All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the
conversation is to be aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act of 1993 shall be complied with in
respect to the nature of the personal information collected, the purpose for its collection, how it is used and what is disclosed to any other party.
”
Back to Contents Page