Dell Precision M40 - Manual (Page 62)

Assigning an Owner Tag
An owner tag can have up to 48 characters; any combination of letters, numbers, and spaces is valid.
1. Boot the computer from a bootable floppy disk or CD.
2. Type cd c:\Dell\Util and press <Enter>.
3. Type asset /o and a space followed by the new owner tag, and press <Enter>.
For example, type the following command line and press <Enter>:
asset /o ABC Company
4. When the computer prompts you to verify the owner tag, type y and press <Enter>.
The computer displays the new owner tag.
Deleting an Owner Tag
1. Boot the computer from a bootable floppy disk or CD.
2. Type cd c:\Dell\Util and press <Enter>.
3. Type asset /o /d and press <Enter>.
To use one of the following command-line options, open an MS-DOS ® prompt, type asset and a space followed by the option, and then press
<Enter>.
Asset Tag Utility Command-Line Options
Using the Security Cable Slot
To prevent unauthorized removal of the computer, you can use a security cable to attach the computer to an immovable object. Your computer has
two security cable slots, located on the both sides of the computer.
1. Loop the cable around an immovable object.
2. Insert a locking device into the security cable slot, and lock the device. Instructions for installing this kind of antitheft device are usually
included with the device.
Antitheft devices for mobile workstationcomputers usually include a segment of metal-stranded cable with an attached locking device and
associated key.
NOTE: For security, you cannot set, change, or delete the owner tag if the primary or administrator passwords are set.
Asset Tag
Option
Description
/d Deletes the asset tag number
/o tag Specifies a new owner tag
/o /d Deletes the owner tag
/? Displays the Asset Tag utility help screen
NOTE: Before purchasing an antitheft device, make sure that it will work with a security cable slot.