Dell C1760NW Color Laser Printer User Manual

Page 131

Advertising
background image

Understanding the Printer Menus

129

WPS Setup

Purpose:
To configure the wireless network using WPS.
Values:

NOTE:

WPS 2.0 compliant. WPS 2.0 works on access points with the following encryption types: Mixed mode PSK, WPA-PSK

AES, WPA2-PSK AES, WPA-PSK TKIP, Open (No Security)

NOTE:

For Dell C1760nw Color Printer, this item is displayed when the Ethernet cable is disconnected and

Wireless LAN

is

set to

Enable

.

NOTE:

For Dell C1660w Color Printer, this item is displayed only when

Wireless LAN

is set to

Enable

.

Reset Wireless

Purpose:
To initialize wireless network settings. After executing this function and rebooting the printer, all wireless network

settings are reset to their default values.

NOTE:

For Dell C1760nw Color Printer, this item is displayed when the Ethernet cable is disconnected and

Wireless LAN

is

set to

Enable

.

NOTE:

For Dell C1660w Color Printer, this item is displayed only when

Wireless LAN

is set to

Enable

.

TCP/IP

Purpose:
To configure TCP/IP settings. The change takes effect after the printer is turned off and then on.
Values:

Push Btn. Ctrl

PBC Start

*1

Configures the wireless setting with the security method of WPS-PBC.

PIN Code

Start Config.

Configures the wireless setting using the PIN code assigned automatically

by the printer.

Print PIN Code

Prints the PIN code. Confirm it when you enter the PIN code to your

computer.

*1

You can also start WPS-PBC by pressing and holding the

(Wi-Fi | WPS) button.

IP Mode

Dual Stack*

Uses both IPv4 and IPv6 to set the IP address.

IPv4 Mode

Uses IPv4 to set the IP address.

IPv6 Mode

Uses IPv6 to set the IP address.

IPv4

Get IP Address AutoIP*

Automatically sets the IP address.

BOOTP

Uses BOOTP to set the IP address.

RARP

Uses RARP to set the IP address.

DHCP

Uses DHCP to set the IP address.

Panel

Enables the IP address entered on the operator panel.

IP Address

Manually sets the IP address allocated to the printer.

Subnet Mask

Manually sets the subnet mask.

Gateway Address

Manually sets the gateway address.

Advertising
This manual is related to the following products: