Dell C1760NW Color Laser Printer - Manual (Page 200)

198 Maintaining Your Printer
Entering Values
The Operator Panel
Using the operator panel, enter the values that you found in the color registration chart to make adjustments.
1 Load paper. For details about loading paper, see "Loading Print Media" on page 151.
2 Press the
(Menu) button.
3 Press the button until Admin Menu appears, and then press the (Set) button.
4 Press the button until Maintenance appears, and then press the (Set) button.
5 Press the button until Color Reg Adj appears, and then press the (Set) button.
6 Press the button until Enter Number appears, and then press the (Set) button.
7 Ensure that Enter (Y, M, C) appears, and then press the or button until you reach the value (for
example, +3) displayed on the chart.
8 Press the button once and move the cursor to the next value.
9 Repeat steps 7 and 8 to enter all of the digits, and then press the (Set) button.
10 Ensure that Enter (LY, LM, LC) appears.
11 Press the or button until you reach the value (for example, +3) displayed on the chart.
12 Press the button once and move the cursor to the next value.
13 Repeat steps 11 and 12 to enter all of the digits, and then press the (Set) button.
14 Ensure that Enter (RY, RM, RC) appears.
15 Press the or button until you reach the value (for example, +3) displayed on the chart.
16 Press the button once and move the cursor to the next value.
17 Repeat steps 15 and 16 to enter all of the digits, and then press the (Set) button.
18 Press the
(Menu) button.
19 Press the button until Admin Menu appears, and then press the (Set) button.
20 Press the button until Maintenance appears, and then press the (Set) button.
21 Press the button until Color Reg Adj appears, and then press the (Set) button.
22 Press the button until Color Regi Chart appears, and then press the (Set) button.
The color registration chart is printed with the new values.
23 Adjust the values for every color until the lines at 0 are the straightest. If a line is not the straightest at 0, determine
the value and adjust the printer again.
The Tool Box
Using the Tool Box, enter the values that you found in the color registration chart to make adjustments.
1 Click Start → All Programs → Dell Printers → Dell C1760nw Color Printer or Dell C1660w Color Printer
→ Tool Box.
NOTE: The Select Printer window appears in this step, when multiple printer drivers are installed on your computer. In this
case, click Dell C1760nw Color Printer or Dell C1660w Color Printer listed in Printer Name, and then click OK.
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select Color Registration Adjustment from the list at the left side of the page.
The Color Registration Adjustment page is displayed.