Dell C1760NW Color Laser Printer - Manual (Page 138)

136 Understanding the Printer Menus
Color Reg Adj
Purpose:
To specify whether to manually adjust color registration.
Color registration adjustments need to be made during the initial setup of the printer or when the printer is moved
to a different location.
NOTE: The Color Reg Adj feature can be configured when Auto Reg Adj is set to Off .
Values:
Clean Developer
Purpose:
To rotate the developer motor and stir the toner in the toner cartridge.
Auto Correct Automatically corrects color registration.
ColorRegi Chart Prints a color registration chart. The color registration chart prints a
lattice pattern of yellow, magenta, and cyan lines. On the chart, find
the values on the right side that are next to the line that is perfectly
straight for each of the three colors. If the value for this line is 0, color
registration is not needed. If the value for this line is any value other
than 0, specify the adjustment values under Enter Number .
Enter Number Y 0 * Specifies lateral (perpendicular to paper feed direction) color
adjustment values individually for Y (Yellow), M (Magenta), C
(Cyan).
Available Range: -5–+5
M 0 *
Available Range: -5–+5
C 0 *
Available Range: -5–+5
LY 0 * Specifies process (paper feed direction) color adjustment values
individually for LY (Left Yellow), LM (Left Magenta), LC (Left
Cyan), RY (Right Yellow), RM (Right Magenta) and RC (Right
Cyan).
Available Range: -5–+5
LM 0 *
Available Range: -5–+5
LC 0 *
Available Range: -5–+5
RY 0 *
Available Range: -5–+5
RM 0 *
Available Range: -5–+5
RC 0 *
Available Range: -5–+5