Dell 968 All In One Photo Printer - Manual (Page 78)

To print from an external Bluetooth-enabled device, you must attach a USB Bluetooth adapter to the
PictBridge port. The Bluetooth icon appears on the display once the USB Bluetooth adapter is active.
To view or change Bluetooth Default Settings:
1. Press the up or down Arrow button to scroll to Setup, and then press the Select button .
2. Press the up or down Arrow button to scroll to Change Bluetooth Default Settings, and then
press the Select button .
Pass Key
Trusted Devices–Clear All
Device Name
Device Address
Paper Handling
Bluetooth Default Settings Menu
Menu
item
Settings
Bluetooth
Enabled
On*
Off
Discovery
Mode
On*
Off
Security Specify your preferred security level.
Low*
High
Pass Key Specify a pass key. Any external Bluetooth-enabled device needs to enter this pass key
before it sends a print job.
NOTE: You only need to specify a pass key if the Security Level is set to High.
Trusted
Device-
Clear All
Press the Select button to clear the list of trusted devices.
NOTE: Your printer stores a maximum of eight external Bluetooth-enabled devices (trusted
devices). When the printer detects more than eight devices, the least recently used device is
removed from the list.
Device
Name
The name assigned to the USB Bluetooth adapter. When printing from an external
Bluetooth-enabled device, the Device Name or Device Address should be selected.
Device The address of your USB Bluetooth adapter. When printing from an external Bluetooth-
NOTE: When Bluetooth Enabled is set to On, the printer accepts Bluetooth
connections and allows the USB Bluetooth adapter to communicate with other Bluetooth-
enabled devices.
NOTE: Set the Discovery Mode to On if you want other Bluetooth-enabled devices to
detect the USB Bluetooth adapter attached to your printer.