Dell PowerEdge 2600 User Manual
Page 55
Advertising
7.
Installing a Replacement ERA/O Card
").
8.
Replacing the cooling shroud (see "
").
9.
Replace the cooling fans (see "
10.
Replace the power supplies (see "
11.
").
12.
Replace all other cables removed when the system board was removed (intrusion alarm cable, control panel cable, IDE cable for the CD/diskette drive,
and the power and interface cables from the power distribution module).
13.
Reconnect the system to its electrical outlet(s) and turn the system on, including any attached peripherals.
Back to Contents Page
Advertising