Dell PowerEdge 2600 - Manual (Page 9)

Table 3-3. Back-Panel Indicators
Power Indicator Codes
The system has indicators on the power button and on the power supplies that signify system power status.
Power-Button Indicator Codes
The power button controls the power input to the system's power supplies. The power-button indicator can provide information on power status (see
Figure 3 -2 ).
Table 3 -4 lists the power-button indicator codes.
Table 3-4. Power-Button Indicator Codes
Power-Supply Indicator Codes
Each hot-pluggable power supply has indicators that can provide information on power status, fault, and the presence of power (see Figure 3 -4 ). Table 3 -5
lists the power-supply indicator codes.
Figure 3-4. Power-Supply Indicators
Table 3-5. Power-Supply Indicator Codes
Component Description
NIC indicators Provides information on NIC status (see " NIC Indicator Codes ").
ERA/O Ethernet connector indicators Provides information about the ERA/O Ethernet connector status (see " ERA/O Ethernet Connector Indicator Codes ").
Indicator Indicator Code
On Indicates that power is supplied to the system, and the system is operational.
Off Indicates that no power is supplied to the system.
Blinking Indicates that power is supplied to the system, but the system is in a standby state. For more information on standby states, see your operating
system documentation.
Indicator Indicator Code
Power-on Green indicates that the power supply is operational.
Fault Red indicates a problem with the power supply (fan failure, voltage error, etc.).
Power present Green indicates that power is present at the power supply and that the system is connected to a power source.