Battery pack, Recharging the battery pack, Removing and replacing the battery pack – Dell Alienware M17x (Mid 2009) User Manual

Page 17

Advertising
background image

017

017

/

CHAPTER 2: GETTING TO KNOW YOUR NOTEBOOK

Battery Pack

Your notebook is equipped with a high-energy rechargeable lithium ion (Li-ion)

battery pack. Battery life will vary depending on the notebook configuration,

notebook model, applications installed, power management settings of the

notebook, and notebook features used by the customer. As with all batteries, the

maximum capacity of this battery will decrease with time and usage.

The battery meter LEDs on the battery pack indicates the charge level of the battery.

When you press the battery meter once, the charge level LEDs illuminate. Each of

5 LED represents approximately 20% of the total battery charge. For example, if

4 LEDs light up, there is 80% of battery charge remaining and if no LEDs light up,

there is no charge remaining in the battery.

Recharging the Battery Pack

Your notebook supports both on-line and off-line recharge. Follow the procedure

below to recharge battery:

Make sure the battery pack is installed in the notebook.

Connect the AC adapter to the notebook and to an electrical outlet.

The power button LED is available to reflect the power and battery status. For

details on the power button LED, refer to “Power Button” on page 14. When the

notebook is OFF, a depleted Li-ion battery will take three hours to recharge.

Removing and Replacing the Battery Pack

This battery pack can easily be removed and replaced. Make sure that the notebook

is properly shut down before changing the battery pack.

CAUTION: To avoid damage to the notebook, use only the battery designed

for this particular Alienware notebook. Do not use batteries designed for

other Alienware or Dell computers.

Follow the steps below to remove the battery pack.

Shut down the notebook.

1.

Flip the notebook upside down.

2.

Push the battery latch to the unlock position as shown.

3.

The battery pack will pop up.

4.

Remove the battery pack.

5.

Follow the steps below to replace the battery pack.

Align the three battery pack tabs with the battery bay.

1.

Slide the battery pack into the battery bay until the battery pack clicks

2.

into place.

2

3

4

1

1 battery bay

3 battery pack tabs (3)

2 battery latch

4 battery pack

Advertising