Password protection, Advanced recovery, Factory system recovery – Dell Alienware M17x (Mid 2009) User Manual

Page 53

Advertising
background image

053

053

/

CHAPTER 7: SYSTEM RECOVERY

Password Protection

Since AlienRespawn v2.0 has the ability to reformat your hard drive and can be

accessed without entering Windows, the password-protection functionality has

been included for your security.

This feature is disabled by default, but can be enabled through the Respawn

Settings application, described below.

CAUTION: If you forget your password, you will not be able to access

AlienRespawn v2.0, except by booting to the optional AlienRespawn v2.0

disc as described in “To Use the AlienRespawn v2.0 Disc” on page 54).

Alienware Technical Support will not be able to recover your password.

If you choose to enable password protection, you do so at your own risk.

To Enable or Change Password Settings

In Windows, click the

1.

Start (Windows logo) button, choose All Programs, and

select the

AlienRespawn v2.0 program group.

Click on the icon labeled

2.

Respawn Settings.

The

3.

Respawn Settings application will launch.

If you are enabling password protection for the first time, enter the

default password, “alienware” (case-sensitive), in the appropriate field,

then click

Submit.

If you have already defined a password, enter your current password in

the appropriate field, then click

Submit.

To change your password, enter the new password in both fields in the

4.

Change Password section, then click Apply.
To enable or disable password protection, select the check box labeled

5.

Enable

Respawn Password Protection, then click Apply.
When password protection is enabled, you will be prompted to enter the

6.

password after pressing <F10> to run AlienRespawn v2.0 as described in

“Using AlienRespawn™ v2.0” on page 52).

Advanced Recovery

This method will completely reformat your hard drive and return your computer to

its original factory configuration resolving all software/configuration issues. This

option is best for most software-related issues.

A backup of your entire current hard drive will be created in

C:\BACKUP, from

which data files may be copied to permanent locations. Once you have retrieved all

desired files, this directory may be safely deleted.

In cases of virus/spyware infection, it is advisable to thoroughly scan and clean

C:\BACKUP prior to copying files out of it; for this reason, it is recommended that

you install and run your preferred third-party antivirus/antispyware utilities prior

to retrieving your data.

If viruses or spyware were present prior to running AlienRespawn v2.0, there is a

chance of re-infection from backup files if these are not successfully cleaned.

Factory System Recovery

This option is for last-resort system recovery.

This method will completely reformat your hard drive and return your computer

to its configuration as shipped. This is a complete system recovery – the entire

configuration is restored to its factory default state, resolving all software/

configuration issues. Viruses or spyware will be eliminated. However, it is advised

that you scan all external storage media to prevent re-infection.

No data backup will be performed. All saved data will be lost.

Advertising