Dell POWEREDGE R710 - Manual (Page 29)

Dell HPC Tiered Storage Solution
Page 27
make sure you specify sufficient access rights for other users if
you are also
planning to install Software agents involving third party
software protection.
[X] 1) Allow read permission to other users
[X] 2) Allow write permission to other users
[X] 3) Allow execute permission to other users
[a=all n=none r=reverse q=quit d=done >=next <=previous ?=help]
Enter number(s)/one of "a,n,r,q,d,>,<,?" here:
17. If you indicated “Yes” in Step 15, you are prompted for the group name that you must use to
launch processes. Enter the group name and then press Enter.
Please enter the name of the group which will be assigned to all
Software files and on behalf of which all Software processes will
run. In most of the cases it's a good idea to create a dedicated
"simpana" group. However, if you're planning to use Oracle
iDataAgent or SAP Agent, you should enter Oracle's "dba" group
here.
Group name: sky1
REMINDER
If you are planning to install Simpana Informix, DB2, PostgreSQL,
Sybase or Lotus Notes iDataAgent, please make sure to include
Informix, DB2, etc. users into group "sky1".
Press <ENTER> to continue ...
18. Type a network TCP port number for the Communications Service (CVD) and press Enter. Type a
network TCP port number for the Client Event Manager Service (EvMgrC) and press Enter.
Every instance of Simpana should use a unique set of network
ports to avoid interfering with other instances running on the
same machine. The port numbers selected must be from the reserved
port number range and have not been registered by another
application on this machine.
Please enter the port numbers.
Port Number for CVD : [8600]
Port Number for EvMgrC: [8602]
19. If you do not want to configure the firewall services, press Enter.
Is there a firewall between this client and the CommServe? [no]
20. Type the fully qualified CommServe host name and press Enter.