Dell Latitude C540 - Manual (Page 31)

1.
2.
Click OK, and wait until the device you want to eject is cleared from the list of devices in the Unplug
or Eject Hardware window. 3.
Keep the display open, and tilt the computer back so that you can access the bottom of the computer. 4.
Slide and hold the latch release, and pull the device out of the module bay. 5.
Insert the new device into the bay, and push it until you hear a click. 6.
When the Windows operating system recognizes the new device, click Close. 7.
Using the CD or DVD Tray
NOTICE: Do not press down on the drive tray when opening or closing it. Keep the tray closed when
you are not using the drive.
NOTICE: Do not move the computer when playing CDs or DVDs.
Press the eject button on the front of the drive. 1.
Pull the tray out. 2.
Place the disc, label side up, in the center of the tray. 3.
Snap the disc onto the spindle. 4.
Push the tray back into the drive. 5.
You can play a DVD on your computer if the computer includes a DVD drive or a CD-RW/DVD combo drive.
You can write data to a blank CD on your computer if the computer includes a CD-RW or CD-RW/DVD combo
drive.