Ipmi oem command list – Dell PowerEdge C6145 User Manual
Page 52
IPMI OEM Command List | 52
6
IPMI OEM Command List
Table 6-1. OEM1 Commands (NetFn 30H, 31H)
Command
NetFN cmd Format
Reserved
Extended
Configuration
OEM1 01H Request:
Response:
Byte 1 – completion code
Byte 2 - Reservation ID
Get Extended
Configuration
OEM1 02H Request:
Byte 1 - Reservation ID
Byte 2 - Configuration ID
Byte 3 - Attribute ID. 00h means read entire
configuration data.
Byte 4 - Index (used by table object only)
Byte 5 - Data Offset – LSB
Byte 6 - Data Offset – MSB
Byte 7 - Bytes to read. FFh means read entire
configuration or attribute.
Response:
Byte 1 – Completion code (01h:no more
data)
Byte 2 – Configuration ID
Byte 3 – Attribute ID
Byte 4 – Index (valid only for table object
only)
Byte 5 – Number of bytes returned, 1-based
Byte 6~N – Data
(Please check with table 1-25 Extended
Configuration)