Dell PowerEdge C6145 - Manual (Page 8)

Using the WEB UI | 8
Remote Management Controller GUI Explained
After you successfully log in to your Remote Management Controller, you are
greeted with the Remote Management Controller GUI.
Logout
Log out from your Remote Management Controller
The default timeout value is 30 seconds.
System Information
System Information
Click the System Information tab to view the Remote Management Controller.
The System Information tab enables you to view the System Power Status,
firmware revision, aux firmware revision, and build time.
Table 2-2. BMC Information
BMC Information Description
System Power Status On or Off
Firmware Revision Remote Management Controller firmware revision.
Aux Firmware
Revision
Remote Management Controller firmware
aux revision.
Build Time Date the firmware was last built in the form:
MM DD YYYY HH:MM:SS