Dell PowerEdge C6145 - Manual (Page 65)

IPMI OEM Command List | 65
Account Status 4 1 Status of the account. This
is the supplement to the
byte 3 of response data of
Get User Access command.
Indexed by user ID.
00h = status is unspecified
01h = user ID is enabled
via Set User Password
02h = user ID is disabled
via Set User Password
03h = user ID is lockout
R I
Configuration ID = 06h, DNS
Attribute ID Size Description
DNS Dhcp Enable 1 1 Specifies that the DNS
server IP addresses should
be assigned from the
DHCP server.
0: FALSE (default)
1: TRUE.
R/W
DNS Server1 2 4 Specifies the IP address for
DNS server 1. This
parameter is read-only if
DNS Dhcp Enable and
DHCP are enabled.
R/W
DNS Server2 3 4 Specifies the IP address for
DNS server 2. This
parameter is read-only if
DNS Dhcp Enable and
DHCP are enabled.
R/W
DNS Register BMC 4 1 Enables registering the
BMC host name on the
DNS server
0: FALSE (default)
1: TRUE.
R/W
DNS BMC Host
Name
5 1..64 Specifies the DNS BMC
host name. This parameter
is read-only if DNS
Register BMC is set to
TRUE. At least one
R/W