Dell PowerEdge R900 - Manual (Page 151)

Running the System Diagnostics 151
Using the Custom Test Options
When you select Custom Test in the Main Menu window, the Customize
window appears and allows you to select the device(s) to be tested, select
specific options for testing, and view the test results.
Selecting Devices for Testing
The left side of the Customize window lists devices that can be tested.
Devices are grouped by device type or by module, depending on the option
you select. Click the (+) next to a device or module to view its components.
Click (+) on any component to view the tests that are available. Clicking a
device, rather than its components, selects all of the components of the
device for testing.
Selecting Diagnostics Options
Use the Diagnostics Options area to select how you want to test a device. You
can set the following options:
• Non-Interactive Tests Only — When checked, runs only tests that require
no user intervention.
• Quick Tests Only — When checked, runs only the quick tests on the
device. Extended tests will not run when you select this option.
• Show Ending Timestamp — When checked, time stamps the test log.
• Test Iterations — Selects the number of times the test is run.
• Log output file path name — When checked, enables you to specify
where the test log file is saved.
Extended Test Performs a more thorough check of the system. This test can take
an hour or longer.
Custom Test Tests a particular device.
Information Displays test results.
Table 5-1. System Diagnostics Testing Options
Testing Option Function