Dell PowerEdge R900 - Manual (Page 85)

Installing System Components 85
Figure 3-13. Installing a RAID Battery
Removing a RAID Battery
1 Remove the SAS controller card. See "Removing a SAS Controller Card"
on page 80
2 Pull the RAID battery carrier latch away from the chassis.
3 Lift the RAID battery carrier out of the system.
4 Gently pulling back the two guides holding the RAID battery into the
battery carrier, remove the RAID battery from the battery carrier.
1 Mounting hole (2) 2 RAID battery latch
3 Battery carrier guide
1
2
3