Dell PowerEdge R900 - Manual (Page 72)

72 Installing System Components
Figure 3-7. Hot-plugging a Front System Fan
Removing a Back System Fan
CAUTION: Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. See your Product
Information Guide for complete information about safety precautions, working
inside the computer, and protecting against electrostatic discharge.
1 Open the system. See "Removing the Top Cover" on page 60.
2 Locate the fan you are removing.
1 Brace 2 Fan
3 Loop handle 4 Fan connector
1
2
4
3