Display latch – Dell Inspiron 510m User Manual
Page 18
Advertising
Display Latch
1.
Remove the
keyboard
.
2.
Remove the
.
3.
Remove the
.
4.
Remove the M2 x 5-mm screw that secures the display bracket to the top cover.
5.
Lift the display bracket out of the top cover, and then remove the display latch.
Back to Contents Page
4 inverter connector
NOTICE:
Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTE:
Ensure that the display bracket is upright when you replace the display latch.
1 top cover
2 M2 x 5-mm screw (1)
3 display bracket
4 display latch
Advertising