Installing the system board – Dell Inspiron 510m User Manual
Page 39
11.
Gently push down near the middle of the back plastic computer base so that the two system- board securing clips clear their slots, and then pull out the
system board.
Installing the System Board
1.
Follow all of the steps in "
2.
Turn on the computer.
3.
Insert the floppy disk or CD that accompanied the replacement system board into the appropriate drive. Follow the instructions that appear on the
screen.
Back to Contents Page
1 M2 x 4-mm screws labeled "B" (4)
1 system-board securing clips (2)
NOTICE:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
damage to the computer.
NOTE:
After replacing the system board, enter the computer Service Tag into the BIOS of the replacement system board.