Dell Inspiron 510m User Manual
Page 21
Back to Contents Page
Fan
Dell™ Inspiron™ 510m Service Manual
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
keyboard
.
3.
Remove the
palm rest
.
4.
Remove the
microprocessor thermal-cooling assembly
.
5.
Pull straight up on the fan cable connector to disconnect it from the system board connector.
6.
Remove the two M2.5 x 8-mm screws from the fan, and pull the fan away from the system board.
Back to Contents Page
CAUTION:
Before performing the following procedures, read the safety instructions in your Owner's Manual.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1 M2.5 x 8-mm screws (2)
2 fan
3 fan cable connector
4 system board connector