Dell Inspiron 510m - Manual (Page 30)

7. Disconnect the touch pad connector from the system board.
8. Starting at the back center of the palm rest, use your fingers to separate the palm rest from the computer base by gently lifting up the palm rest while
pressing down on the back of the computer base.
Back to Contents Page
1 M2.5 x 8-mm screws (13)
1 system board connector
2 touch pad connector
3 computer base
NOTICE: Carefully separate the palm rest from the computer base to avoid damage to the palm rest.
NOTE: When you reinstall the palm rest, attach the right side of the palm rest first.