Dell 7330dn Mono Laser Printer - Manual (Page 22)

Usage Profile Reports
Dell 7330 Mono Laser Printer System Administrator Guide
3-6
Note: To send usage profile reports using email, MaiLinX must be properly set up. See
MaiLinX Remote Printing on page 3-11.
Protocol Control
This section includes:
„ HTTP on page 3-6
„ TCP/IP on page 3-7
„ Port 9100 on page 3-7
„ LPR on page 3-8
„ IPP (Internet Printing Protocol) on page 3-8
„ SNMP (Simple Network Management Protocol) on page 3-9
„ FTP (File Transfer Protocol) on page 3-9
„ Email Server or SMTP (Simple Mail Transfer Protocol) on page 3-10
„ MaiLinX Remote Printing on page 3-11
„ MaiLinX Alerts on page 3-12
See also:
Discovery Protocols on page 2-4
All network protocols, including network printing, printing services, printer discovery, and
management protocols can be enabled or disabled on the printer. If a protocol is enabled, you
can set configuration parameters.
Note: To secure protocols, disable any protocols you are not using. This prevents unauthorized
access through applications that use these protocols. For example, if you want to use IPP for a
secure printing channel, disable the other printing protocols, Port 9100 and LPR.
HTTP
By default, HTTP is enabled. For information on disabling HTTP, contact Dell Technical
Support at
www.support.dell.com .
See also:
About HTTP, HTTPS, and SSL/TLS on page 4-3