Dell 7330dn Mono Laser Printer - Manual (Page 40)

Securing the Hard Drive
Dell 7330 Mono Laser Printer System Administrator Guide
4-10
Securing the Hard Drive
This section includes:
„ Selecting the Hard Drive Overwrite Security Option on page 4-10
„ Selecting the Automatic Removal of Secure, Personal, and Proof Jobs Option on
page 4-11
Selecting the Hard Drive Overwrite Security Option
When a file is deleted from the printer’s hard drive, only the file name is deleted; the data in
the file remains on the hard drive, regardless of the operating system. An unauthorized person
could, possibly, retrieve the data in the file that was deleted.
Printers with a hard drive have a Hard Drive Overwrite Security option. This option overwrites
the data stored on the hard drive of a file marked for deletion using DOD5200.28-M, a U.S.
Department of Defense three-pass overwriting process: first with a pattern of 0s (zeros), next
with a pattern of 1s, and finally with a random pattern of bits. This is done before the file’s
directory entry is removed and the storage space on the hard drive is marked as available for
reuse. The random pattern of bits stays on the hard drive until it is overwritten by another file.
By default, the Hard Drive Overwrite Security option is disabled. To select the Hard Drive
Overwrite Security option, you can use one of the following methods:
„ The printer control panel.
„ The EWS
Using the Control Panel
To select the automatic removal of secure, personal, and proof print files from the hard drive:
1. On the control panel, select Printer Setup and then press the OK button.
2. Select File Security and then press the OK button.
Note: If File Security is locked on the control panel, use the EWS to select the Hard
Drive Overwrite Security option.
3. To remove all secure, personal, and proof print job files:
a. Select Overwrite Removals and then press the OK button to select On or Off .
Note: The option Remove Job Files does not remove saved or protected print job files.