Configuring administrator and key user settings, Configuring administrator and key user settings -8, Configuring – Dell 7330dn Mono Laser Printer User Manual
Page 38: Administrator and key user settings, Configuring administrator, And key user settings, Configuring administrator and, Key user settings
Configuring Administrator and Key User Settings
Dell 7330 Mono Laser Printer System Administrator Guide
4-8
Configuring Administrator and Key User
Settings
To prevent unauthorized changes to printer settings:
1.
Launch your web browser.
2.
Enter your printer’s IP address in the browser Address field.
3.
Click Properties.
4.
On the left navigation panel, select the Security folder.
5.
Select Administrative Security Settings.
6.
If prompted, enter your Admin or Key User name and password.
7.
In the Administrator Settings box, do one or both of the following:
In the Host Access List field, enter the IP addresses or host names of the computers
allowed to change printer settings. Separate entries with a blank or a comma, specify
ranges with a hyphen (-), and use an asterisk (*) to represent a group of numbers
(e.g., 13.62.156.*). The default setting is Unrestricted, which allows all users to
change printer settings.
In the User Name and Password fields, enter your user name and password (up to 10
alphanumeric characters). In Verify Password, re-enter the password. The user name
and password should be kept secure.
8.
Repeat Step 7 in the Key User Settings box. When entering the user name and password,
enter the user name and password for key users.
Note:
If you want to use the Key User account, you must configure an Administrator
account. If the Administrator account is empty, then Any User has the same permissions as
the Administrator user.
9.
In the Feature Authorization box, select the check boxes next to the settings you want to
enable for each type of user. Clear the check boxes next to the settings you want to prevent
users from changing. The administrator has full rights and access to all functions. The Any
User class may not have greater access to a function than the Key User class.
Note:
If you want to prevent users in the Key User or Any User classes from using the
EWS to change printer settings, clear the Modify Configuration Web Pages check box.
If you want to prevent users in the Key User or Any User classes from viewing the EWS
pages that control printer settings, clear the View Configuration Web Pages check box.
10.
Click the Save Changes button.
See also: