Dell 2407WFP Monitor - Manual (Page 5)

Screen type Active matrix - TFT LCD
Screen dimensions 24 inches (24-inch viewable image size)
Preset display area:
Horizontal 518.4 mm (20.4 inches)
Vertical 324.0 mm (12.7 inches)
Pixel pitch 0.270 mm
Viewing angle +/- 89° (vertical) typ, +/- 89° (horizontal) typ
Luminance output 450 cd/m ²(typ)
Contrast ratio 1000:1 (typ)
Faceplate coating Antiglare with hard-coating 3H
Backlight 6 CCFLs U-type backlight
Response Time 6 ms typical (Grey to Grey) / 16 ms typical (Black to White)
Resolution
Horizontal scan range 30 kHz to 81 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz, exception 1920 x 1200 at 60 Hz only
Optimal preset resolution 1920 x 1200 at 60 Hz
Highest preset resolution 1920 x 1200 at 60 Hz
Video Supported Modes
Video display capabilities (DVI playback) 480p/576p/720p/1080p (Supports HDCP)
Video display capabilities (Composite playback) NTSC/PAL
Video display capabilities (S-Video playback) NTSC/PAL
Video display capabilities (Component playback) 480i/480p/576i/576p/720p/1080i
Preset Display Modes
Dell™ guarantees image size and centering for all preset modes listed in the following table.
Display Mode Horizontal Frequency
(kHz)
Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity
(Horizontal/Vertical)
VGA, 720 x 400 31.5 70.1 28.3 -/+
VGA, 640 x 480 31.5 59.9 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.3 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1600 x 1200 75.0 60.0 162.0 +/+
VESA, 1920 x 1200 74.0 60.0 154.0 +/-
Electrical
Video input signals Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance
Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input impedance
S-video, Y input 1 volt(p-p), C input 0.286 volt(p-p), 75 ohm input impedance
Composite, 1 volt(p-p), 75 ohm input impedance
Component: Y, Pb, Pr are all 0.5~1volt(p-p), 75 ohm input impedance
Synchronization input signals separate horizontal and vertical,
3.3V CMOS or 5V TTL level, positive or negative sync.
SOG (Sync on green)
AC input voltage / frequency / current 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)
Inrush current 120V: 40A (Max.)
240V: 80A (Max.)