Removing the stand, Vertical extension – Dell 2407WFP Monitor User Manual
Page 50
Advertising
Vertical Extension
Stand extends vertically up to 100mm via the Lock down / release button.
Removing the Stand
After placing the monitor panel on a soft cloth or cushion, press and hold the Monitor Lock / Release Button, and then remove the stand.
NOTE:
Stand is detached and extended when the monitor is shipped from the factory.
NOTE:
If locked in the down position, press the Lock down / release button on the bottom rear of stand. Lift the front panel up and extend the stand to
the desired height.
NOTICE:
Before relocating
or
moving the monitor to a different location, make sure that the stand is LOCKED DOWN. To lock it down, lower the height
of the panel until it clicks and is locked into place.
Advertising