Bluetooth board, Removing the bluetooth board, Replacing the bluetooth board – Dell Studio 1450 (Mid 2009) User Manual
Page 10
4.
Replace the display bezel (see
Replacing the Display Bezel
).
5.
Replace the display assembly (see
Replacing the Display Assembly
).
6.
Replace the WWAN module (see
Replacing the WWAN Module
).
7.
Replace the system board (see
Replacing the System Board
).
Bluetooth Board
Removing the Bluetooth Board
1.
Follow the procedures in
Before You Begin
.
2.
Remove the bluetooth card (see
).
3.
Disconnect the bluetooth board cable from the bluetooth board cable connector.
4.
Using the pull-tab, lift and slide the bluetooth board away from the display cover.
Replacing the Bluetooth Board
1.
Slide the bluetooth board until it is firmly seated under the tabs.
2.
Connect the bluetooth board cable to the connector on the bluetooth board.
3.
Replace the bluetooth card (see
Back to Contents Page
1
pull-tab
2
bluetooth board cable connector
3
tabs (2)