Battery, Removing the battery, Replacing the battery – Dell Studio 1450 (Mid 2009) User Manual
Page 4
Back to Contents Page
Battery
Removing the Battery
1.
Follow the procedures in
Before You Begin
.
2.
Turn the computer over.
3.
Slide the battery release latch until it clicks into place.
4.
Slide the battery out of the battery bay.
Replacing the Battery
To replace the battery, slide the battery into the battery bay until it clicks into place.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the
computer.
CAUTION:
To avoid damage to the computer, use only the battery designed for this particular Dell™ computer. Do not use batteries designed for
other Dell computers.
1
battery
2
battery release latch