Dell Studio 1450 (Mid 2009) User Manual
Page 3
Advertising
2.
Place the I/O board on the computer base.
3.
Replace the two screws that secure the I/O board to the computer base.
4.
Connect the I/O board cable to the connectors on the I/O board and the system board.
5.
Replace the palm rest (see
Replacing the Palm Rest
).
6.
Replace the keyboard (see
Replacing the Keyboard
).
7.
Replace the memory modules (see
Replacing the Memory Module(s)
).
8.
Replace the hard drive (see
Replacing the Hard Drive
).
9.
Replace the Mini-Cards, if applicable (see
Replacing the Mini-Card
).
10.
Replace the base cover (see
Replacing the Base Cover
).
11.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
Advertising