Replacing the wwan module – Dell Studio 1450 (Mid 2009) User Manual
Page 47
Replacing the WWAN Module
1.
Connect the WWAN module cable to the connectors on the WWAN module and the system board.
2.
Place the WWAN module on the computer base.
3.
Replace the three screws that secure the WWAN module to the computer base.
4.
Replace the optical drive (see
Replacing the Optical Drive
).
5.
Replace the speaker module (see
Replacing the Speaker Module
).
6.
Replace the palm rest (see
Replacing the Palm Rest
).
7.
Replace the keyboard (see
Replacing the Keyboard
).
8.
Replace the hard drive (see
Replacing the Hard Drive
).
9.
Replace the Mini-Cards, if applicable (see
Replacing the Mini-Card
).
10.
Replace the memory modules (see
Replacing the Memory Module(s)
).
11.
Replace the base cover (see
Replacing the Base Cover
).
12.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
WWAN module
2
WWAN module cable connector