Dell PowerVault 122T SDLT 320 (Autoloader) - Manual (Page 30)

Back to Contents Page
Introduction: Dell™ PowerVault™ 122T SDLT 320 Autoloader User's Guide
Overview
The PowerVault 122T SDLT 320 autoloader is the first fully automated, rack mountable, 2U (3.34" height, 16.5" width), enterprise class SDLT tape storage
system designed to provide unattended, near-line and off-line data storage. This high throughput, high capacity, storage device is optimized for applications
that provide archiving, hierarchical storage management, backup and retrieval functionality for low to mid-range servers and networks.
The autoloader is a SCSI-2 low-voltage Differential (LVD) data storage device that incorporates a Super DLTtape I drive and contains up to eight tape slots.
The autoloader occupies two SCSI target addresses, one for the tape drive and the other for the autoloader robotics. The autoloader uses up to eight Super
DLTtape I cartridges, providing a compressed capacity of 2.56 Terabytes and a sustained data transfer rate as high as 1.92 GB per minute, assuming a 2:1
compression ratio.
The autoloader is compatible with the most popular operating systems and environments supporting a SCSI LVD interface, but requires either direct support
from the operating system or a compatible backup application to take full advantage of its many features.
Back to Contents Page