Dell PowerVault DR2000v - Manual (Page 17)

ID Issue Description Workaround/Solution
images not found and
vRanger errors
19576 If you set up two bond
interfaces with two
different subnets but
use the same static IP
address, the
configuration service
fails. Corrected in version 3.1.
19233 Need to clear the error,
"file system is corrupt
and please run
consistency checker,"
after a system --init Corrected in version 3.1.
19184 During container
delete, cleaner does
not start. Corrected in version 3.1.
19091 Cannot collect
diagnostics if an
upgrade fails. Corrected in version 3.1.
Using the "diagnostics --start --service"
command can start the diagnostic service if it
is down after upgrade failure. Once the
service is up, diagnostics can be collected.
18833 The Reboot link is
enabled after a DR
Series system software
upgrade. Corrected in version 3.1. The Reboot link is
enabled during upgrade and has now been
disabled during upgrade. It can be selected
once the upgrade is complete.
18742, 18629 With CIFS, backups are
failing, with error "The
specified network name
is no longer available..."
after upgrade. Corrected in version 3.1.
18664 On the DR Series
system log on page, if
you enter an invalid
user name, the Your
password was not
correct error
displays. Corrected in version 3.1. The correct error
message is now displayed.
18661 If you power on a new
MD1200 expansion
enclosure (that is
cabled in) while the
base DR Series system
is operational, the
machine may go into Corrected in version 3.1.
17